E-njoint™ Miyagi Starters Pack Standard
E-njoint™ Miyagi. Wax on. Wax off.
De E-njoint™ Miyagi is awax vaporizer in a unique cone shape that is really easy to use and clean.
What's in the package:
|Rechargeable||1x Rechargeable Battery Standard|
|Adjustable Airflow||1x Miyagi Wax Cartridge|
|VPre-heat function||1x USB Charger|
|3 voltage settings|
Charging the battery: Connect the battery to the USB charger and plug the USB charger into a standard USB outlet. Charge the battery as long as the LED is red. When the LED on the USB charger turns green the battery is fully charged. Screw the Wax Cartridge onto the battery when fully charged.
Switching on/off: Five quick clicks on the push-button turns the E-njoint™ Miyagi on. Five quick clicks again, turns the E-njoint™ Miyagi off.
Single Use: Make sure the E-njoint™ Miyagi is turned on. Important! The wax cartridge has a wax heating chamber and a mouthpiece. Remove the mouthpiece to fill the heating chamber by putting wax directly onto the coil. Keep the button pressed in while vaping. Release the button when you are done. Repeat the process as you please.
Preheat function: High viscosity waxes might require preheating to make the wax thinner. A preheat cycle can be started by quickly clicking the push button twice. During the preheat cycle the three color LED will flash showing different colors. After approximately 15 seconds the preheat cycle will stop automatically. Follow the Single Use procedure to start vaping.
Voltage setting: The E-njoint™ Miyagi has three voltage settings allowing you to optimize your vaping experience. The voltage can be set by quickly clicking the push button three times and look what color LED is after the three clicks. 3.7 V (Green), 3.9 V (Blue) and 4.1 V (Red). Simply click three times to change the voltage setting. After Power Off, the setting will be stored in the memory.
Airflow Adjusting: By turning the black ring on the battery, you can adjust the airflow of the E-njoint™ Miyagi . This will allow you to optimize and fine-tune the airflow to your preferences.
Tip: Press the button to see if the E-njoint™ Miyagi is on or off. If the button is not illuminated when pressed, the E-njoint™ Miyagi is switched off.
Do not operate the button for single vape or preheat function when the cartridge is empty as the E-njoint™ Miyagi might be overheated and permanently damaged.