E-njoint™ Revolution CBD Starters Pack
The Ultimate Oil Pen!
A patented cone shaped vaping device which can be charged time after time.
Utilizing the latest technologies, allowing you to easily fill the 1.2ml cartridges with any CBD or THC extracted oil.
What's in the package:
|Rechargeable||1x Rechargeable Battery Standard|
|Adjustable Airflow||1x Revolution Oil Cartridge 1,2ML|
|VPre-heat function||1x USB Charger|
|3 voltage settings|
Charging the battery: Connect the battery to the USB charger and connect the USB charger to a standard USB outlet. Charge the battery as long as the LED is red. When the LED on the USB charger turns green the battery is fully charged. Screw the cartridge onto the battery when fully charged.
Switching on/off: Five quick clicks on the push-button turns the E-njoint™ Revolution on. Five quick clicks again, turns the E-njoint™ Revolution off.
Single Use: Make sure the E-njoint™ Revolution is turned on. Keep the button pressed in while vaping. Release the button when you are done. Repeat the process as you please.
Preheat function: High viscosity liquids (thick oils) might require preheating to make the oil thinner. A preheat cycle can be started by quickly clicking the push button twice. During the preheat cycle the three color LED will flash showing different colors. After approximately 15 seconds the preheat cycle will stop automatically. Follow the Single Use procedure to start vaping.
Voltage setting: The E-njoint™ Revolution has three voltage settings allowing you to optimize your vaping experience. The voltage can be set by quickly clicking the push button three times and look what color LED is after the three clicks. 3.7 V (Green), 3.9 V (Blue) and 4.1 V (Red). Simply click three times to change the voltage setting. After Power Off, the setting will be stored in the memory.
Airflow Adjusting: By turning the black ring on the battery, you can adjust the airflow of the product. This will allow you to optimize and fine-tune the airflow to your preferences.
All E-njoint™ oil cartridges are fully tested at the factory. The heating chamber is primed with a drop of 100% Food Grade Propylene Glycol (odor- and tasteless) to make sure the functionality and airflow of the product is according to E-njoint™ standards. Be aware that when you fill the E-njoint™ Revolution Cartridge with your oil, it might take 3-5 puffs before your oil reaches the heating chamber and the first few puffs might just be vape from the Propylene Glycol. Preheating the chamber will draw the oil towards the heating chamber. (2 clicks).
Tip: Press the button to see if the E-njoint™ Revolution is on or off. If the button is not illuminated when pressed, the E-njoint™ Revolution is switched off.
Do not operate the button for single vape or preheat function when the cartridge is empty as the E-njoint™ Revolution might be overheated and permanently damaged.