E-njoint™ Freedom CBD Starters Pack
The Ultimate Oil Pen!
A patented cone shaped vaping device which can be charged time after time.
Utilizing the latest technologies, allowing you to easily fill the 0.45ml cartridges with any CBD or THC extracted oil.
What's in the package:
|Rechargeable||1x Rechargeable Battery Standard|
|Pre-heat function||1x CBD Filled Olie Cartridge 0,45ML|
|510 Thread||1x USB Charger|
Charging the battery: Connect the battery to the USB charger and connect the USB charger to a standard USB outlet. Charge the battery as long as the LED is red. When the LED on the USB charger turns green the battery is fully charged. Screw the cartridge onto the battery when fully charged.
Switching on/off: Five quick clicks on the push-button turns the device on. Five quick clicks again, turns the device off.
Single Use: Make sure the device is turned on. Keep the button pressed in while vaping. Release the button when you are done. Repeat the process as you please.
Preheat function: High viscosity liquids (thick oils) might require preheating to make the oil thinner. keep the button pressed in for 5 to 10 seconds before vaping allowing the oil around the heating chamber become thinner and improve the functionality of the product. Follow the Single Use procedure to start vaping.
All E-njoint™ oil cartridges are fully tested at the factory. The heating chamber is primed with a drop of 100% Food Grade Propylene Glycol (odor- and tasteless) to make sure the functionality and airflow of the product is according to E-njoint™ standards. Be aware that when you fill the E-njoint™ Freedom Cartridge with your oil, it might take 3-5 puffs before your oil reaches the heating chamber and the first few puffs might just be vape from the Propylene Glycol. Preheating the chamber will draw the oil towards the heating chamber. (2 clicks).
Tip: Press the button to see if the device is on or off. If the button is not illuminated when pressed, the device is switched off.
Do not operate the button for single vape or preheat function when the cartridge is empty as the device might be overheated and permanently damaged.